1:24

Master Box 1/24 Happy Couple (MB24029)


Yes, this review is dedicated to new figurines from Master Box. As you can see on the main photo, plastic is molded in 1/24 scale and copies two figurines - happy couple. Obviously, scale hints on possible use with car builds, and I think it could be an interesting scene together with those two. Box style is typical for this manufacturer, so let's open it, and take a closer look at parts.
By the way, here you can read review with another Master Box kit.
Don't forget to like our Facebook page, so that you can get fresh articles on time.

Да, этот обзор посвящён новым фигуркам от Master Box. Как вы можете видеть на основном фото, набор отлит в масштабе 1/24 и копирует две фигурки - молодую пару. Как вы понимаете, масштаб намекает на возможное использование с наборами автомобилей, и мне кажется это был бы интересный проект. Стиль коробки типичен для данной компании, так что давайте откроем её и рассмотрим содержимое.
Кстати, здесь вы можете прочитать обзор с ещё одним набором Master Box.
Не забудьте поставить лайк нашей странице Facebook, чтобы вовремя получать свежие статьи.



Of course, inside you will find one and only plastic sprue with all necessary parts for two figurines. Molding quality is good, so there is no flash on the parts.

Разумеется, внутри вы найдёте только один литник со всеми нужными деталями для двух фигурок. Качество литья хорошее, облой отсутствует.


Moreover, due to scale parts division is a bit different from what we are used to see in 1/35 kits. On the photo above you can notice that torso should be glued out of two halves. Moreover, there are no positioning pins inside. Assembly manual and painting guide can be found on the back side of the box.

Более того, из-за масштаба, членение отличается от того, что мы привыкли видеть в 35-ых наборах. На фото выше вы можете видеть, что тело будет склеиваться из двух половин. Более того, внутри нет направляющих. Инструкция по сборке и схема окраски разместились на задней стороне коробки.


Today's kit offers nice possibility to assemble two figurines for your car kit. We can all agree that such project would look more interesting than just car on board. Moreover, good molding quality should be helpful too. The only thing you should be aware of - some parts are divided into two halves and will require due care to be glued together.
You can find this kit on official Master Box website.

Сегодняшний набор позволяет собрать две фигурки для вашей модели автомобиля. Мы можем согласиться, что подобный проект будет более интересным чем просто машина на подставке. Более того, хорошее качество литья тоже пригодится. Единственное, о чём стоит помнить - некоторые детали поделены на половины и потребуют аккуратной подгонки.
Вы можете найти данный набор на официальном сайте Master Box.

About DetailScaleView

0 comments:

Post a Comment

Powered by Blogger.