Miniart 1/35 BMR-I Late with KMT-7 (37039)

This time we are going to take a look at Miniart 1/35 BMR-I Late with KMT-7 (37039). It is easy to guess from the name that one box will bring us the vehicle together with KMT-7 in the front. Such combo should look impressive in 1/35 scale. Moreover, this is not an interior kit, so you will be able to focus on external features instead. Packaging is typical, all sprues come sealed in one bag. Let's open it and take a closer look together.
By the way, here you can read review with German Car kit.
Don't forget to like our Facebook page, so that you can get fresh articles on time.
You can help us get the new camera - just press "Donate" button on the right panel.
Support us by buying from Amazon via this link.

First frame is one of the biggest here and it carries hull sections. Note that some panels feature separate hatches.

These are the parts for KMT-7. Assembly should be easy, but you will have to be careful with thin parts.

Well, the same applies to afv parts as well. Some of them are so small, that you might have to use tweezers.

Each drive sprocket should be glued out of two halves. There are guiding pins inside which will help with alignment. Note also small parts which will be used for KMT.

Side skirts are quite large, so I would recommend to check their fitment before gluing everything into the place.

Here you can see one-piece roadwheels which will require some kind of template or careful painting with thin brush. In the top right corner you can see elements for KMT.

Each stowage box should be glued out of several panels. In theory you can assemble them open, but then you have to copy locks somehow.

Turret should be glued out of several parts. Overall design looks good and should be easy to work with.

Track parts come in the separate plastic bag. Such thing should look great, but will require some time to assemble.

Clear frame is packed into separate plastic bag. Molding quality looks fine, but there are no masks included. PE fret should be handy for some fine features. Decals sheet comes from Decograph. You can see three markings on the photo below.

Assembly manual is typical for this brand. I show all pages in the video-review.

Today's vehicle combo should be already available for purchase. In one box you will get a nice plastic together with all necessary things like PE. The only item I would like to see - masks template, as wheels painting might be a bit tedious. Oh, be ready to work with track links, as this process won't be enjoyable too. Well, at least you can be sure that the final result would look great on the model. Moreover, such addition gives you more possibilities for various diorama ideas.
Get this and other kits on official Modelimex webshop.


  • Nice molding quality
  • Clever parts division
  • Great decals
  • PE included


  • No masks for clear parts or roadwheels

About DetailScaleView


Post a Comment

Powered by Blogger.