Firma49 1/24 Alfetta Wheels (T056/24)

Today we are going to talk about Firma49 1/24 Alfetta Wheels (T056/24). Kit comes as yet another upgrade for the well-known racecar model from Czech company Smer. Small box will bring you four wheels which should be a noticeable improvement over original parts. All of them are 3D-printed, so it will be interesting to check the quality and design of those. Overall packaging is simple, parts come in ziplock bag. Let's open it and take a closer look together.

By the way, here you can read review with original Alfetta set.
Don't forget to like our Facebook page, so that you can get fresh articles on time.
You can help us get the new camera - just press "Donate" button on the right panel.

Watch this video-review where I show all parts even closer.

First of all note the design of those parts, as they come in special protective container. This is quite cool solution to keep everything intact.

Parts are a bit hard to see in such packaging, but the main difference is noticeable. Yes, we finally get nice spoked rims instead of whatever design was supplied in the original kit. Just look at the photo below and see the difference with your own eyes.

New set should be already available for purchase. In my opinion Firma49 did a great job here, and such upgrade is a must-have for your car build. Moreover, installation should be quite easy, as those will be glued on the standard axles. Combine those wheels with the front mask, and you will get completely different result here. Now let's hope that we will also get the engine and cockpit from the same brand. :)

Thank you for your help and support in getting this kit.